Detailed Specifications

Control System: +Pulse Width Control 1520usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.16sec/60 degrees at no load
Stall Torque (4.8V): 18 oz/in. (1.3kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Counter Clockwise/Pulse Traveling 1520-1900usec
Current Drain (4.8V): 3.2mA/idle
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Plastic Bearing
Gear Type: All Nylon Gears
Connector Wire Length: 6"
Dimensions: 1.26" x 0.45"x .96" (32 x 11.5 x 24.5mm)
Weight: .28oz. (8g)