HS-425BB Super Sport BB


	ServoCity- Servos & Accessories- Hitec Servos- HS-425BB Super Sport BB-


	HS-425BB Super Sport BB

57 oz-in.

0.16 sec/60°


	The HS-425BB is the best standard servo under $15. We love this servo for robotic projects because it is easy to modify for wheeled applications and it comes with dual ball bearings so it operates extremely smooth. We offer the HS-425BB in several configurations, 90° stock rotation, 180° modified rotation, continuous rotation (potentiometer is left outside the servo case) and reverse rotation.




	This servo can operate 180° when given a pulse signal ranging from 600usec to 2400usec. Since most R/C controllers cannot generate this wide of signal range, you will need to purchase our servo stretcher for 180° operation.

	Detailed Specifications
	Control System: +Pulse Width Control 1500usec Neutral Required Pulse: 3-5 Volt Peak to Peak Square Wave Operating Voltage: 4.8-6.0 Volts Operating Temperature Range: -20 to +60 Degree C Operating Speed (4.8V): 0.21sec/60° at no load Operating Speed (6.0V): 0.16sec/60° at no load Stall Torque (4.8V): 45.82 oz/in. (3.3kg.cm) Stall Torque (6.0V): 56.93 oz/in. (4.1kg.cm) Operating Angle: 45 Deg. one side pulse traveling 400usec 360 Modifiable: Yes Direction: Clockwise/Pulse Traveling 1500 to 1900usec Current Drain (4.8V): 8mA/idle and 150mA no load operating Current Drain (6.0V): 8.8mA/idle and 180mA no load operating Dead Band Width: 8usec Motor Type: 3 Pole Ferrite Potentiometer Drive: Indirect Drive Bearing Type: Dual Ball Bearing Gear Type: Nylon Connector Wire Length: 11.81" (300mm) Dimensions: See Schematics Weight: 1.6oz (45.5g)

Price:

$14.99

Part:

31425S

Status:

Rotation:

Direction:

Qty:


	A = .780” (19.82mm) B = .530” (13.47mm) C = 1.33” (33.79mm) D = .400” (10.17mm) E = .380” (9.66mm) F = 1.19” (30.22mm) G = .460” (11.68mm) H = 1.05” (26.67mm) J = 2.08” (52.84mm) K = .368” (9.35mm) L = .172” (4.38mm) M = 1.57” (39.88mm) X = .120” (3.05mm)


	Copyright 1999-2009 Robotzone. LLC. - All Rights Reserved ServoCity is a registered trademark of Robotzone, LLC.