|
Control System: +Pulse Width Control 1500usec Neutral Required Pulse: 3-5 Volt Peak to Peak Square Wave Operating Voltage: 4.8 Volts Operating Temperature Range: -20 to 60 Degree C Test Voltage: 4.8 Volts Operating Speed: 0.09 sec/60° at no load Stall Torque: 8.33 oz/in. (0.6kg.cm) Operating Angle: 40° one side pulse traveling 400usec 360 Modifiable: No Direction: Clockwise/Pulse Traveling 1500 to 1900usec Current Drain: 8mA/idle and 100mA no load operating Dead Band Width: 8usec Motor Type: 3 Pole Ferrite Potentiometer Drive: Direct Drive Bearing Type: None, outer case serves as bearing Gear Type: All Nylon Connector Wire Length: 6.29" (160mm) Dimensions: 0.82" x 0.44"x 0.86" (20.9 x 11.4 x 22mm) Weight: 0.22oz (6.4g) 0.21oz (6.1g) without horn or screw
|